A high quality, British made spray cabinet.
Constructed for use in industry.
Filters airborne particulate matter, solvent vapour and gas.
Extracts to outside atmosphere (via flexi-duct tubing) Applications: Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size.
A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Operation: For artwork applications A1 (A100H-D) drawing boards can be placed within the hood enclosure.
The boards fit at an angle for efficient overspray capture.
3D items, models, printed circuit boards etc.
may be placed onto the hood base for spraying, cleaning, sanding, gluing etc.
The Flexi-duct(s) can be fixed to a standard domestic vent(s) or simply placed through a partially open window to facilitate portability or convenience.
Features: Steel construction finished in dove grey fan/filter unit mounted onto hood enclosure particulate filter centrifugal blowers, external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter Flexi-duct 2 metres x 100mm (A100H-D has 2 ducts).
This unit is designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the spray/fume shield are exhausted to atmosphere via the flexi-duct.
Specification: MODEL DIMENSIONS H x W x D AIR VELOCITY AT HOOD FACE A100H-D 660 x 960 x 620 mm 0.30 m/sec 59ft/min
Items are made to order and therefore cannot be returned