|
Price:
£4.50 (€5.70)
£5.40 (€6.84) Including VAT at 20%
High Strength Clear Epoxy, only £4.50!
Manufactured by Sylmasta in the UK.
Sylmasta Flash is an ultra-fast setting, high strength, clear epoxy adhesive which has excellent adhesion to metal, ceramic tiles, brick, concrete, wood and most hard plastics. It comes in a 25ml twin-syringe pack, for easy measurement.
It can be used for the repair of ceramic ornaments and metal or wood furniture, for the fixing of fittings to brick, wood or plaster, for fixing stone slabs and copings and for modelling and test rig
manufacture.
After mixing, Sylmasta Flash begins to set in 1 minute at 20°C, with a handling time of just 20 - 30 minutes.
Technical Data
| Working time |
1 minute @ 20ºC |
| Initial set |
1 - 2 minutes @ 20ºC |
| Handling time |
20 - 30 minutes @ 20ºC |
| Cure time |
12 hours |
| Lap shear to steel |
18-20 MPa |
| Shore D Hardness |
82 |
| Bond line thickness |
<2mm |
| Application temperature |
+5ºC to +35ºC |
| Service temperature |
-40ºC to +93ºC |
| Colour |
Glass Clear (in thin film) |
The above values are typical for Sylmasta Flash and should only be used as a guide.
b> Sylmasta Flash 25ml Syringe
A twin-syringe pack for easy and accurate measuring with minimal waste. Simply dispense required amount, mix and apply.
Quantity:
|
