Price:
 £234.00 (€296.18)
  £280.80 (€355.42) Including VAT at 20%

These units exhaust air via flexi-duct externally to atmosphere.

These units are designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the spray/fume shield are exhausted to atmosphere via the flexi-duct.

Art & Graphics applications:
Reclining position: - For aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.

Hobbies, Modelling & Craft Applications:
Upright position: - For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fumes, vapours and fine dusts and powders from other sources can also be extracted.

Features:
Comprising: <100mm flexi-duct - All Steel construction - finished in dove grey - plastic replaceable hood/shield.

Specification:

MODEL	DIMENSIONS H x W x D	AIR VELOCITY AT HOOD FACE
A300S-D	390 x 565 x 430 mm	0.55 m/sec 49ft/min

 Click Here For Diagram

Quantity:

Buy Spare IFA3 Filters (Pack of 6) (£89.00 +VAT)  

Price:
 £735.00 (€930.32)
  £882.00 (€1,116.38) Including VAT at 20%

A high quality, British made spray cabinet, available in 2 sizes.
• Constructed for use in industry.
• Filters airborne particulate matter, solvent vapour and gas.
• Extracts to outside atmosphere (via flexi-duct tubing)

Applications:
Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture. The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

Operation:
For artwork applications, standard A2 (A200H-D) or A1 (A100H-D) drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct(s) can be fixed to a standard domestic vent(s) or simply placed through a partially open window to facilitate portability or convenience.

Features:
• Steel construction finished in dove grey
• fan/filter unit mounted onto hood enclosure
• particulate filter
• centrifugal blower (A100H-D has 2 blowers) external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter.
• Flexi-duct(s) 2 metres x 100mm dia. (A100H-D has 2 ducts).

These units are designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the spray/fume shield are exhausted to atmosphere via the flexi-duct.

Specification:

MODEL	DIMENSIONS H x W x D	AIR VELOCITY AT HOOD FACE
A200H-D	525 x 680 x 450 mm	0.25 m/sec 49ft/min
A100H-D	660 x 960 x 620 mm	0.30 m/sec 59ft/min

 Click Here For Diagram

Quantity:

Price:
 £89.00 (€112.65)
  £106.80 (€135.18) Including VAT at 20%

Replacement IFA3 filters for A300S-D & A200H-D DUCTED

Contains:
• Six IFA3 particulate filters

(Suitable for about 12 months for average user)
 

Quantity:

Price:
 £117.00 (€148.09)
  £140.40 (€177.71) Including VAT at 20%

Replacement IFA2P filters for A100H-D DUCTED

Contains:
• Six IFA2P particulate filters

(Suitable for about 12 months for average user)
 

Quantity: