Price:
 £6.66 (€8.43)
  £7.99 (€10.12) Including VAT at 20%

This is a 2-component epoxy adhesive for heavy-duty applications. The bond strength can be increased by curing at a higher temperature. It will set with a very hard surface finish, with high resistance to impact, ageing and moisture.

Materials:
Metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast®, glass fiber reinforced synthetics, rigid PVC, rubber, rigid foam plastics such as Styropor®. Not suitable for sticking large areas of glass.

Working time:
2 hours at room temperature.

Setting:
The setting time depends on the temperature; final strength can be increased by applying heat (not over 200°C - see table).

Temperature	Setting time	Strength
20 °C	12 hrs	1200 N/cm²
40°C	3 hrs	1800 N/cm²
70 °C	45 min	2000 N/cm²
100 °C	10 min	2500 N/cm²
180 °C	5 min	3000 N/cm²

UHU Endfest "300kg" comes in a variety of sizes, from a 33g retail back in tubes to a 9kg kit comprising of 2 tins. 

Quantity:

Price:
 £6.05 (€7.66)
  £7.26 (€9.19) Including VAT at 20%

This is a fast setting epoxy adhesive that has an initial cure in 5 minutes. Mix proportion: 1 part binder to 1 part hardener (by volume). Working time (open time) up to 5 minutes; initial strength achieved after 20 minutes. Final strength = 1300 N/cm².

The adhesive is transparent once it has set; it will resists impact, ageing and the effects of moisture. 

Quantity:

Price:
 £6.05 (€7.66)
  £7.26 (€9.19) Including VAT at 20%

This is a fast epoxy adhesive, which has a fast setting time.Mix proportion: 1 part binder to 1 part hardener (by volume). Working time (open time) up to 2 minutes; initial strength achieved after 5 minutes. Final strength = 800 N/cm².

The adhesive is transparent once it has set; it will resists impact, ageing and the effects of moisture. 

Quantity:

Price:
 £10.45 (€13.23)
  £12.54 (€15.88) Including VAT at 20%

Universal strong contact adhesive with high immediate strength.
Especially suitable for smooth surfaces.
Materials can be bonded quickly.
Strong and clean bonds for extreme loads.
Extraordinary temperature resistant from -20 ° C to +125 ° C.

Material:
Wood, wood products, many plastics, metal, glass, porcelain, ceramics, leather, rubber, felt, cork, fabric.
Not suitable for Styropor and soft PVC.

Processing:
Surfaces to be bonded should be clean, dry and dust-and grease free.

Adhesive should be applied to both surfaces.
Leave for about 10 minutes pressed together.
 

Quantity:

Price:
 £6.55 (€8.29)
  £7.86 (€9.95) Including VAT at 20%

Universal Polyurethane Construction Adhesive

• Universal PU construction adhesive for interior & exterior
• Extremely strong and resilient
• Fills gaps - lightly foaming
• Can be painted once dry
• 100% waterproof according to EN 204 (D4)
• weather-resistant
• Resistant to temperatures from -20°C to +100°C 

Quantity:

Price:
 £2.47 (€3.13)
  £2.96 (€3.76) Including VAT at 20%

Universal Polyurethane Construction Adhesive

Special quick-setting adhesive for assembling rigid polystyrene foam and in conjunction with other materials. UHU Por sets to an elastic adhesive film, which is colourless and waterproof.

UHU Por is suitable for bonding rigid foam materials such as polystyrene to themselves and to other materials such as wood, paper, metal, ceramic, plaster, textiles and various plastics.

UHU Por is also highly suitable for sticking photographs. 

Quantity:

Price:
 £1.69 (€2.14)
  £2.03 (€2.57) Including VAT at 20%

• The proven, fast, crystal-clear universal adhesive.

• For universal applications at home, in the office, for modelling, at school and for crafts.

• Adhesive film remains elastic.

• Does not crinkle paper. 

Quantity:

Price:
 £2.15 (€2.72)
  £2.58 (€3.26) Including VAT at 20%

• The firm power adhesive - super-strong, super-fast, clean, universal.
• Oval shape can be used to apply adhesive over areas or in lines.
• Can be used in single-side bonds (wet bonding) or in dual-side bonds (contact bonding).
• Covers a large area (100-150g covers 1m²).
• Not suitable for Styropor®, polythene (PE) or polypropylene (PP).
• Resists water, mineral oils, dilute acids and alkalis.
• Withstands temperatures between 30°C and 60°C. 

Quantity: