Price:
 £3.15 (€4.24)
  £3.70 (€4.98) Including VAT at 17.5%

High quality superglues, available in three grades.

PENETRATING (THIN): This is a very thin grade of superglue, used to run into joints or cracks after the parts have been assembled. This grade, in the 500g pack, can be used to build 3D prototypes models with ZCorp Printers .

MULTI-PURPOSE (MEDIUM): For general use - can be used for sticking plastics, metal, porcelain, fine china, ceramics, jewellery and model making.

HIGH VISCOSITY (THICK): This is an extra thick superglue for bonding parts with large gaps or porous surfaces.
Try using this thick grade with an activator to quickly set it into a thick bead to fill large gaps. Simply apply a bead over the gap, spray the activator over the adhesive and wait a few moments. The superglue will set and create a plastic bead which will fill gaps and bond across joints.

Bulk prices are available

 

Quantity:

Price:
 £50.00 (€67.24)
  £58.75 (€79.01) Including VAT at 17.5%

As above but in 500g bottles.

Our Penetrating grade has been found to be suitable for use with ZPrinters.
 

Quantity:

Thickness
Penetrating (Very Thin like Water)
Multi-Purpose ( Medium Thickness)
High Viscosity (Very Thick For Gap Filling)

Price:
 £6.50 (€8.74)
  £7.64 (€10.27) Including VAT at 17.5%

The 'Gel' grade is a very thick gap filling adhesive. It can be used to fill large gaps and build a 'fillet', giving extra strength. The use of the activator is recommended to reduce the curing time of this adhesive.
 

Quantity:

Price:
 £4.75 (€6.39)
  £5.58 (€7.51) Including VAT at 17.5%

Extra fine application nozzles will apply the smallest drop of Superglue or a very fine bead, giving cleaner, neater glue lines. Extra fine nozzles fit the Multi-Purpose, Low Viscosity and High Viscosity Superglues.
These very fine nozzles will give total control of Superglue, reducing wastage and allowing beads and drops as small as 0.5mm to be applied.
The nozzles are reusable and can be cut back as they become worn. 

Quantity:

Price:
 £6.83 (€9.18)
  £8.03 (€10.79) Including VAT at 17.5%

For fast curing of Superglue and for porous materials.
Superglue activator is used to speed the cure of Superglue adhesives and to prevents them from soaking into porous surfaces, such as wood, card, ceramics and leather.
It comes complete with a brush in the lid, for applying to parts before the adhesive is applied, and a spray head to apply over the adhesive after application.
Spraying over Superglue after application will set the adhesive into a hard bead and this can be of benefit if filling gaps with Superglue.
 

Quantity:

Price:
 £5.78 (€7.77)
  £6.79 (€9.13) Including VAT at 17.5%

Comes complete with a brush top. Debonder will soften and break down Superglue joints.
Once applied to Superglue it will slowly turn into a jelly like substance which can be easily wiped away with a tissue.
It can also be used to remove Superglue from fingers, clean up spills and break down bonded joints.
 

Quantity: