Price:
 £308.18 (€390.08)
  £369.82 (€468.10) Including VAT at 20%

A high quality, British made spray booth, available in 2 sizes.
• Constructed for use in industry.
• Filters airborne particulate matter, solvent vapour and gas.
• No extraction needed.

This unit is recirculatory; i.e. filtered air is exhausted back into the workplace. If you are looking for a spray booth with extraction, try our ducted range of spray booths.

Art & Graphic Applicaitons:
Reclining position (on back-stand) - for light aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. Model A300S will accommodate artwork up to A3 size and A200S up to A2 size. For fume/vapour adsorption and dilution.

Hobbies, Modelling & Craft Applications:
Upright position: - for applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed.

Features
• Particulate filter to 5.0 microns
• Carbon impregnated fibre filter
• Axial fan(s), external rotor motor type (Model A200S has two fans), brushless UL, VDE and CSA approved
• Sealed electrical wiring and switch, downstream of filters
• Steel construction finished in dove grey
• Plastic replaceable Spray/Fume Shield
• Backstand.


Optional accessories available are HEA3 (A300S) and HEA2 (A200S) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Contact Sylmasta for more information.

These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See extraction cabinets A300S-D for complete vapour extraction)

Specification:

MODEL	DIMENSIONS H x W x D	AIR VELOCITY AT HOOD FACE
A300S-S	385 x 580 x 350 mm	0.32 m/sec 49ft/min
A200S-S	515 x 790 x 430 mm	0.35 m/sec 59ft/min

 Click Here For Diagram

Quantity:

Price:
 £614.00 (€777.16)
  £736.80 (€932.59) Including VAT at 20%

A high quality, British made spray cabinet, available in 2 sizes.
• Constructed for use in industry.
• Filters airborne particulate matter, solvent vapour and gas.
• No extraction needed.

This unit is recirculatory; i.e. filtered air is exhausted back into the workplace. If you are looking for a spray booth with extraction, try our ducted range of spray booths.

Applications:
Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture. The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

Operation:
For artwork applications, standard A2 (A200H) or A1 (A100H) drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning,
sanding etc.

Features:
• Particulate filter to 5.0 microns
• Carbon impregnated fibre filter
• Axial fan(s), external rotor motor type (Model A100H has two fans), brushless UL, VDE and CSA approved
• Sealed electrical wiring and switch, (downstream of filters)
• Steel construction finished in dove grey
• Hood enclosure workstation.

These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See our ducted extraction booths and cabinets for complete vapour extraction)

Specification:

MODEL	DIMENSIONS H x W x D	AIR VELOCITY AT HOOD FACE
A200H	525 x 680 x 450 mm	0.25 m/sec 49ft/min
A100H	660 x 960 x 620mm	0.30 m/sec 59ft/min

 Click Here For Diagram

Quantity:

Price:
 £59.50 (€75.31)
  £71.40 (€90.37) Including VAT at 20%

Replacement FKA3 Filter Kit for A300S-S and A200H Bench Type

Contains:
• Three IFA3 particulate filters
• One CHA3 charcoal filter

(Suitable for about 6 months for average user) 

Quantity:

Price:
 £85.00 (€107.59)
  £102.00 (€129.11) Including VAT at 20%

Replacement FKA3 Filter Kit for A200S-S and A100H Bench Type

Contains:
• Three IFA3 particulate filters
• One CHA3 charcoal filter

(Suitable for about 6 months for average user) 

Quantity:

Price:
 £102.00 (€129.11)
  £122.40 (€154.93) Including VAT at 20%

Optional HE495 0.3 micron Filter Kit for A300S-S and A200H Bench Type

Contains:
• Three washable PAD pre-filters (which extend life of main filter)
• One HEPA 0.3 micron filter

(Suitable for about 6 - 12 months for average user)
 

Quantity:

Price:
 £159.00 (€201.25)
  £190.80 (€241.50) Including VAT at 20%

Optional HE705 0.3 micron Filter Kit for A200S-S and A100H Bench Type

Contains:
• Three washable PAD pre-filters (which extend life of main filter)
• One HEPA 0.3 micron filter

(Suitable for about 6 - 12 months for average user)
 

Quantity: