Sylmasta Ltd
 
[ Home Page ]  [ Up ]  [ Catalogue ]  [ Terms & Conditions ]  [ Search ]  [ View Basket ]  [ Checkout ]  [ Send Mail ]  [ Login ] 
Don't want to buy online? Then telephone +44 (0)1444 831459
View Basket
Checkout
Search
Terms & Conditions
Send Mail






 

Online Catalogue    Industry, Maintenance, & Construction    Epoxy Repair Pastes
PBG Abrasion Resistant Liquid Epoxy Paste (Grey)

PBG Abrasion Resistant Liquid Epoxy Paste (Grey)

Price:
 £18.50 (€23.42)

  £22.20 (€28.10) Including VAT at 20%

Sylmasta PBG Brushable Ceramic Grey is an extremely smooth, silicon carbide-filled epoxy that can be applied by brush to provide a low friction coating which protects against abrasion and cavitation. Sylmasta PBG can be used with Sylmasta PBW Brushable Ceramic White to identify areas of high wear - the Grey Paste is applied over the White and will identify areas where the Grey layer is wearing through.

• Silicone carbide provides high abrasion resistance.
• Ultra smooth finish reduces abrasion and cavitation.
• High bond strength to substrate.

MIX RATIO (WR:WH 5:1
GEL TIME (minutes) 90
FULL CURE (hours) 24-48
HARDNESS, SHORE D (full cure, 24 hrs.) 85
COMPRESSIVE STRENGTH (MPa) 80
FLEXURAL STRENGTH (MPa) 60
TENSILE STRENGTH (MPa) 35
DENSITY (gm/cm³) 1.58
SHRINKAGE (%) <1
NON-VOLATILE CONTENT (%) 100
HEAT DISTORTION - Cured at room temperature (°C) 50
HEAT DISTORTION - Post cured (°C) 115
MAXIMUM SERVICE TEMPERATURE (°C) 144
COVERAGE (per kg) (metric) 0.5mm thick 1.2m²
COVERAGE (per kg) (imperial) 0.020in thick 13ft²
  These are typical values and serve as a guideline only.

 

Quantity:

Size:
500g Pack     £18.50 +VAT
5kg Pack     £140.00 +VAT


PHT High Temperature Metal Filled Epoxy Paste (Dark Grey)

PHT High Temperature Metal Filled Epoxy Paste (Dark Grey)

Price:
 £18.50 (€23.42)

  £22.20 (€28.10) Including VAT at 20%

Sylmasta PHT High Temperature Metal Epoxy Paste is a two-part epoxy repair compound designed for repairs exposed to high temperatures up to 200°C. It is ideal for the maintenance and repair of pumps, valves, metals castings, low pressure pipes and tanks, and automotive bodywork. It can be used on metal, wood and most plastics and provides excellent protection against corrosion and chemical attack.

Sylmasta PHT is reinforced with corrosion-resistant metal platelets, giving a smoother finish when machined than regular metal fillers and does not rust like some metal-filled pastes. The light consistency makes it easier to mix than stiff and heavy traditional epoxy pastes and it is thixotropic, meaning it will not sag. In addition, PHT is virtually odourless, with no unpleasant smell compared to other products.

The resin container has enough room to dispense all of the hardener into the resin so that Sylmasta PHT can be applied with a spatula straight from the pack, if desired. A 180 minute gel time allows larger quantities to be mixed in one go, meaning:
• more time to complete a repair - no need to worry that the paste will cure before completion
• less waste - the paste cures on the repair, not in the pot
• longer pot-life at higher ambient temperatures, making PHT suitable for warm climates with less chance of premature curing.

MIX RATIO (WR:WH 3:1
GEL TIME (minutes) 180
FULL CURE (hours) 24-48
HARDNESS, SHORE D (full cure, 24 hrs.) 80
COMPRESSIVE STRENGTH (MPa) 105
FLEXURAL STRENGTH (MPa) 100
TENSILE STRENGTH (MPa) 35
DENSITY (gm/cm³) 1.46
SHRINKAGE (%) <1
NON-VOLATILE CONTENT (%) 100
HEAT DISTORTION - Cured at room temperature (°C) 60
HEAT DISTORTION - Post cured (°C) 150
MAXIMUM SERVICE TEMPERATURE (°C) 200
COVERAGE (per kg) (metric) 1mm thick 0.6m²
COVERAGE (per kg) (imperial) 0.040in thick 7.5ft²
  These are typical values and serve as a guideline only.

 

Quantity:

Size:
500g Pack     £18.50 +VAT
5kg Pack     £140.00 +VAT



 
 
 
Back to Top