Price:
 £36.00 (€45.57)
  £43.20 (€54.68) Including VAT at 20%

Araldite 2020 is a two component low viscosity, water white epoxy adhesive especially suitable for glass and ceramic bonding. Araldite 2020 is also suitable for clear castings and laminates. The refractive index is similar to that of glass.
Although 2020 was developed for glass bonding it will also bond a wide variety of ceramics, metals, rubbers and rigid plastics.
Araldite 2020 comes complete in kit form with mixing cups and spatulas. 

Quantity:

Price:
 £5.85 (€7.40)
  £7.02 (€8.88) Including VAT at 20%

This is the standard rapid setting epoxy that initially cures in 10 minutes but gains in strength over 24 hours.

Bulk Prices Available
 

Quantity:

Price:
 £31.60 (€40.00)
  £37.92 (€48.00) Including VAT at 20%

This is the standard rapid setting epoxy that initially cures in 10 minutes but gains in strength over 24 hours.

Take the opportunity to buy a carton of six and save.

BULK PRICES AVAILABLE
 

Quantity:

Price:
 £5.85 (€7.40)
  £7.02 (€8.88) Including VAT at 20%

This is a slower setting epoxy that remains usable for 2 hours. The cure time is 6 hours at room temperature. 

Quantity:

Price:
 £15.65 (€19.81)
  £18.78 (€23.77) Including VAT at 20%

Used with the HY956 Hardener, Araldite AY103 Resin is an epoxy resin which is virtually clear. It has been tried and tested by many restorers and modellers as an adhesive and casting resin. As a casting resin it can be poured into moulds for replacing of hands, small heads, handles and making figures. Fine Powder pigments can be added to tint the resin.
Used as an adhesive, it can be used for the bonding of fine china. The resin and hardener mixed by weight is: 100 parts resin to 16-18 parts hardener and by volume the mix is 100parts resin to 18-20 parts hardener. Therefore one tin of hardener is enough for both sizes of resin.
Araldite HY956 Hardener is purchased separately. 

Quantity:

Price:
 £9.75 (€12.34)
  £11.70 (€14.81) Including VAT at 20%

The hardener to be used with Araldite AY103 Resin.
One tin of hardener is enough for both sizes of resin. 

Quantity: